Tag Archives: Maintenance

Six-Month Maintenance on Accessible Vehicles

Every vehicle needs maintenance on a periodic basis, and a wheelchair-accessible vehicle is no exception. Do you take your van to a regular mechanic occasionally for oil changes and tune-ups and then a mobility dealer for the adaptive equipment check-up every six months?

Going to two different places when you don’t need to is poor time management. For smooth operation of your time, vehicle and adaptive equipment, skip the mechanic and take it to a us – we can do both in just one trip.

We have the training and experience needed to maintain and repair complicated, high-tech systems and controls installed in modern wheelchair accessible vans and the expertise in dozens of features that a regular mechanic is not trained to repair.

Wiper Blade Information & Maintenance

Leave a reply

Wiper blades should be replaced every six months to a year or as soon as you notice a difference in driving visibility. When wiper blades no longer make proper contact with the windshield surface, they can begin to squeak, chatter, skip, smear or streak reducing driving visibility.

Wiper Blade Information & Maintenance

An easy way to remember to proactively change your wiper blades is to replace them when the time changes. Whether your alarm clock is gaining or losing an hour, change all your clocks, and then replace your wiper blades.

When inspecting wiper blades, look for the following:

Broken frame – detachment of frame arms at joints or connection points.
Metal Corrosion – especially at joints and claws.
Visible cracks, tears, and missing pieces in the rubber squeegee’s edge.
Flex rubber squeegee back and forth to see if it is still flexible. Aged squeegees will have difficulty conforming to the shape of your windshield and create streaks.
Check squeegee wiping edge for rounded edges which can prevent the wiper blade from making strong contact with the windshield and reduces wipe quality.
Tug to ensure wiper blade has been securely installed on the wiper arm.
Check that squeegee is secure in the wiper frame.

Remember to check your wiper blades as part of your regular preventative maintenance!

Wiper Blade Maintenance Tips
Visibility is fundamental to safe driving. Although drivers depend on their vehicles’ wiper blades to clear away rain, sleet and snow, many wait to replace them until they need them the most. So remembering to maintain wiper blades regularly can maximize visibility, efficiency and reliability.

Wiper blades deteriorate due to many environmental factors including:

Sun: Ultraviolet light and ozone deterioration
Oil: Car waxes and exhaust hold rubber-deteriorating oil
Airborne debris: Sand, mud and dust carried in the wind
Moisture: Acid rain and salt water (in moist air both near the shore and inland)

Remember, wiper blades should be checked every six months and changed at least once a year. Evaluate both the rubber squeegee and the metal frames to avoid common problems such as streaking, skipping, chattering, wearing and splitting – all offenders of reduced visibility and slowed reaction time while driving.

Common Wiper Problems

Streaking occurs when the rubber squeegee dries, hardens and cracks. It can also be caused by tree sap, road tar and other foreign substances collected on either the glass or the blade.
Skipping occurs when the blade develops a curvature from lack of use (e.g. left in the ‘parked position’ for an extended length of time).
Wearing occurs with extensive use and is when the rubber edges are rounded instead of squared.
Splitting is caused when the sun’s ultraviolet rays penetrate the rubber squeegee, causing it to breakdown and separate from the frame.
Bent Refill Vertebra and Bent Frames cause inconsistent contact with the glass surface, creating streaking or skipping.

Avoid these common problems and extend the life of your wiper blades by following these simple steps:

Clean your windshield every time you fill your gas tank.
Gently wipe the rubber squeegee with a damp paper towel to remove any loose dirt or oil.
Never use your windshield wipers to de-ice your windshield. Instead, either use an ice scraper or use your defroster to melt snow and ice.
Pull your wiper blades away from the windshield during winter months to prevent ice build up on the rubber squeegee and to prevent them from sticking to the windshield.

Efficient wiper blades are as important to a vehicle’s safe operation as clean oil and good tires. So remember to change your wiper blades at least once a year, to inspect them frequently for wear and tear and to enjoy the view!

Wheelchair Accessible Vehicle Heater Malfunctions and Maintenance

Leave a reply

Wheelchair Accessible Vehicle Heater Malfunctions and Maintenance

That first day when the world is coated in frost and the temperature has plummeted below freezing is not the time to find out your wheelchair vans heater is not working. Not only would the inside of your car feel like an ice box, but a broken heater can prevent your defroster from blowing warm air to your windshield to eliminate ice and fog, which can pose a hazard while driving. Not having a working heater could even become a dire situation, if you ever end up stranded.

That is why we recommend that you turn your car heater on long before you really need the heat. If your heater doesn’t respond with a warm blast of air, call and schedule an appointment today.

Causes of a breakdown
Your mobility van heater could stop working for a number of reasons, including:

A low antifreeze/water level in the radiator due to a leak in the cooling system.
A bad thermostat that isn’t allowing the engine to properly warm up.
A blower fan that isn’t working properly.
Coolant that contains rust particles or becomes otherwise contaminated and is blocking the heating core from circulating air into the cabin properly.

Depending on the problem, different types of repairs could be required. There really isn’t a heater unit, like a furnace in your house, that you can just replace. It is a combination of different things that provide heat into the vehicle. It’s very difficult to give a cost due to the wide variety of possible problems without inspecting the vehicle first.

One of the most important components, the heater core, which acts like a small radiator, passes the hot air from under the dashboard into the handicapped accessible vehicle. They can cost several hundred dollars to replace and sometimes takes a day or more to repair.

A decrease in the coolant level or a leak in the coolant system is one of the more common problems. Coolant doesn’t evaporate on its own. Topping it off may help in the short term, but it’s an indication of a deeper problem and should be checked out. You shouldn’t have to add anything at all if everything is working well. It can damage the motor if there is low heat from too little coolant.

A leak could be as simple as a loose hose clamp, or a major problem like a leaking engine cylinder head gasket, which can cause serious damage to the engine and cost several hundred dollars to replace.

Maintenance can prevent breakdowns
Several components make up the heating system, so unless you have experience with wheelchair accessible vehicle maintenance, it’s best to have a us diagnose the problem.

In general terms, a heating system works when the vehicle receives heat from the engine’s coolant system. Once the engine reaches its operating temperature — controlled by the thermostat — it heats up the coolant and water mixture, passes it through hoses and valves and into the heating core, which resembles a miniature radiator. A blower fan then pushes the warm air from the heating core through the cabin filter and into the vehicle.

The No. 1 tip is to have a mechanic asses your heater regularly by having a mechanic checking the coolant level and the other components. However, the coolant in newer vehicles may not need service until 60,000 to 100,000 miles, and heating problems usually don’t occur on newer vehicles.

The Importance of Servicing Your Wheelchair Van and Adaptive Equipment

Leave a reply

The Importance of Servicing Your Wheelchair Van and Adaptive Equipment
Owning any type of vehicle means that you have to commit to regular service and maintenance to keep it in good condition. Owning a wheelchair van and adaptive equipment is no different – you still need regular service to keep everything operating the way it should. However, it comes with some additional caveats – you can’t just go to any service center and ensure that you’re maintaining your wheelchair van or mobility equipment correctly.

Here at our Mobility Center, not only do we understand the importance of maintaining your mobility vehicle and adaptive equipment, but we take the needed steps to ensure that everything is always in top condition. No other mobility dealer (that we know of) offers the level of maintenance offered by us.

For example, we can maintain primary and secondary driving controls, as well as providing service for wheelchair ramps and scooter lifts. Along with power seat bases, power door operators, wheelchair securement systems and other adaptive equipment. Those are only a few of the areas that our certified technicians can service and maintain. We also have a rust prevention/treatment that we highly recommend.

You’ll also find that we offer installation as well as service for a range of adaptive equipment like lowered floors, raised doors, adaptive steering controls, turning automotive seats and hand controls. All of our technicians are fully certified in mobility equipment so that you always know you’re in good hands with us.

Automotive Innovations has also created a innovative and ever evolving maintenance program over the past 25 years for our customers. We know that making sure your vehicle and adaptive equipment is in good condition is important to you, but we also understand that it can be difficult for you to tell when or if something needs service or repair. That’s why we started our operational preventative maintenance program over 20 years ago. This program ensures that your wheelchair van or mobility equipment is always in the best operational condition possible, but also assesses the need for repairs or replacement most of the time before anything happens.

We’re dedicated to giving you the peace of mind that you deserve and the maintenance you need to maintain your freedom at all times.

Service and Repair for Wheelchair Accessible Vehicles and/or Accessible Ramp/Lift?

Leave a reply

Are you having trouble with your wheelchair van, ramp van, braun ability van, vantage mobility van, eldorado, amerivan, ricon lift, braun lift, grey market van, ams Legend, Edge, Edge II, Freedom, FR ?

No Worries We Can Fix It!

Even if you have had other Toyota dealer, Dodge dealer, Ford dealer, Honda dealer or a different adaptive mobility equipment dealer try and fix it. Call us, we can help.

Almost all wheelchair van and lift problems can be attributed to three main things. I would like to talk a little about each one and what you can do to be proactive in preventing problems that could stop your lift from operating.?

Reason Number 1: Operator Error. It may not be P.C. to bring it up, but many issues are caused by the user hurrying, not taking the proper precautions, or simply attempting to operate the van or lift in a situation it is not designed for. Let me expand on this a little.

We all know the obvious things an operator can do wrong. Lowering a lift on to extremely uneven ground or folding a platform into a van door that is not fully opened, if you have manual doors. The things that you need to think about are the issues that aren’t so obvious, but can still cause damage. Things like making sure you fully fold the platform when you are putting it in the stowed position. A lot of times people tend to release the fold switch too soon because the lift makes excessive noise when it cinches tight. Far from being a problem, that noise is a good thing What you’re hearing is the electric actuator “ratcheting,” which tells you that the lift is fully stowed and will not rattle as much while you’re driving. A tightly stowed platform will prevent certain lift components from wearing out prematurely, so be sure to keep the fold button pressed!

Another not-so-obvious issue is to make sure the outer roll stop deploys fully before you exit the platform. Think about it. If you are in a hurry and the roll stop is not completely down on the ground, your weight when rolling off of it is going to put excessive stress on those parts and you could cause problems that are easily avoidable. Even if the tip of the roll stop is up just a little bit, take the time to lower it completely before you exit the platform.?

Reason Number 2: Lack of Maintenance. Maintenance, maintenance, maintenance – I can’t say those words enough! Your dealer should set up a maintenance program for you and your lift should be in their shop for a regular check up at least twice a year. Every lift built after 2005 has a cycle counter on it that will tell us the total number of times you’ve used your lift, and all lifts should be maintained every 750 cycles. This is a short point. All you need to know is that if you don’t maintain your lift, something will eventually stop working!

Reason Number 3: Broken Parts. No matter what the product, we’ve all encountered that unexpected broken part that seems to go bad for no apparent reason. This actually represents a small percentage of wheelchair lift failures, and it can usually be avoided if the van or lift is maintained on a regular basis (see reason #2 above!). A typical situation might be a wiring harness that gets cut by component. This type of issue rarely happens out-of-the-blue, and with routine maintenance your dealer should be able to see the problem starting to occur and fix it before it gets worse.

That about sums it up The bottom line is that a properly operated and maintained wheelchair van or lift should give you years of reliable service. Read your manual and work closely with Automotive Innovations to make sure your lift is ready to go whenever you are. If you have any questions or are having an issue with your wheelchair van or lift feel free to call us at 508-697-6006.