Category Archives: Ramps and lifts

Ramp and lift controls for wheelchair van and vehicle users in New England, Boston MA

Service and Repair for Wheelchair Accessible Vehicles and/or Accessible Ramp/Lift?

Are you having trouble with your wheelchair van, ramp van, braun ability van, vantage mobility van, eldorado, amerivan, ricon lift, braun lift, grey market van, ams Legend, Edge, Edge II, Freedom, FR ?

No Worries We Can Fix It!

Even if you have had other Toyota dealer, Dodge dealer, Ford dealer, Honda dealer or a different adaptive mobility equipment dealer try and fix it. Call us, we can help.

Almost all wheelchair van and lift problems can be attributed to three main things. I would like to talk a little about each one and what you can do to be proactive in preventing problems that could stop your lift from operating.?

Reason Number 1: Operator Error. It may not be P.C. to bring it up, but many issues are caused by the user hurrying, not taking the proper precautions, or simply attempting to operate the van or lift in a situation it is not designed for. Let me expand on this a little.

We all know the obvious things an operator can do wrong. Lowering a lift on to extremely uneven ground or folding a platform into a van door that is not fully opened, if you have manual doors. The things that you need to think about are the issues that aren’t so obvious, but can still cause damage. Things like making sure you fully fold the platform when you are putting it in the stowed position. A lot of times people tend to release the fold switch too soon because the lift makes excessive noise when it cinches tight. Far from being a problem, that noise is a good thing What you’re hearing is the electric actuator “ratcheting,” which tells you that the lift is fully stowed and will not rattle as much while you’re driving. A tightly stowed platform will prevent certain lift components from wearing out prematurely, so be sure to keep the fold button pressed!

Another not-so-obvious issue is to make sure the outer roll stop deploys fully before you exit the platform. Think about it. If you are in a hurry and the roll stop is not completely down on the ground, your weight when rolling off of it is going to put excessive stress on those parts and you could cause problems that are easily avoidable. Even if the tip of the roll stop is up just a little bit, take the time to lower it completely before you exit the platform.?

Reason Number 2: Lack of Maintenance. Maintenance, maintenance, maintenance – I can’t say those words enough! Your dealer should set up a maintenance program for you and your lift should be in their shop for a regular check up at least twice a year. Every lift built after 2005 has a cycle counter on it that will tell us the total number of times you’ve used your lift, and all lifts should be maintained every 750 cycles. This is a short point. All you need to know is that if you don’t maintain your lift, something will eventually stop working!

Reason Number 3: Broken Parts. No matter what the product, we’ve all encountered that unexpected broken part that seems to go bad for no apparent reason. This actually represents a small percentage of wheelchair lift failures, and it can usually be avoided if the van or lift is maintained on a regular basis (see reason #2 above!). A typical situation might be a wiring harness that gets cut by component. This type of issue rarely happens out-of-the-blue, and with routine maintenance your dealer should be able to see the problem starting to occur and fix it before it gets worse.

That about sums it up The bottom line is that a properly operated and maintained wheelchair van or lift should give you years of reliable service. Read your manual and work closely with Automotive Innovations to make sure your lift is ready to go whenever you are. If you have any questions or are having an issue with your wheelchair van or lift feel free to call us at 508-697-6006.

Winter Maintenance – Don’t Let Your Battery Leave You Out in the Cold

Leave a reply

With cold weather right around the corner, Autumn is the best time to schedule a battery test.

Old Man Winter can be tough on any vehicle, but the battery, specifically, takes a beating. Your vehicle’s battery loses 33 percent of its power when the temperature dips below freezing, and over 50 percent of its power when the temperature falls below zero.

Expert Advice on Winterizing Your Battery

Seek Professional Help—for your batteries, that is. These aren’t your typical AA batteries, so it’s important to have us check the battery and electrical system. Sometimes the naked eye cannot detect the presence of corrosion because it is hidden under the metal between the connection and the post.
Protect Your Battery from Mr. Freeze. The cold weather can dramatically reduce a person’s energy level and it can do the same to a battery’s available starting power. It’s a good idea to have your car’s starting and charging system tested every six months.
Charge It. Use a battery charger to maintain charge levels and keep the battery in good condition. A fully charged battery will not freeze until -76°F; however, a fully discharged battery could start to freeze at 32°F.
Small Maintenance Chores are Necessary. Preparing your car for the winter doesn’t end with the battery itself. You need to inspect your battery cables, posts, and fasteners. Make sure your cables are in good shape and are secured firmly to the battery.

Winterization Checklist
To maximize protection against cold-weather conditions, now’s the time to make sure you not only winterize your battery, but your vehicle too.

We recommend all vehicle owners to check the following items for a safe winter:

Replace worn windshield wipers every 6 months.
Refill washer fluid often. Winterize with a 50/50 mix of washer fluid and water.
Make sure the heater and defroster are in good working condition.
Inspect all bulbs and lights for proper operation.
Check condition of tires, including the spare.
Measure your tire air pressure regularly.
Change oil every 3,000 miles.
Examine exhaust system for leaks.
Flush and refill cooling system with a 50/50 mixture.
Check drive belts, clamps and hoses.

Everyone should carry emergency gear such as gloves, boots, tire chains, battery booster pack, cell phone, blankets, flares, flashlight and some high-energy, non-perishable snacks.

Wheelchair Van Ramp Vs. Wheelchair Van Lift

Leave a reply

Choosing a wheelchair ramp over a lift system is a matter of budget and personal preference. Both can get you safely in and out of a new or used wheelchair van; however, handicap lowered-floor vans with ramps tend to be less expensive, take up less space and are more fuel-efficient compared to a full-size van, which is used for most wheelchair-lift applications.

Wheelchair Ramps
Wheelchair van conversion ramps normally come in permanent van conversions where the floor is lowered to allow enough headroom for entering and riding in the vehicle. Most lowered-floor vans come with wheelchair ramps and kneeling systems that lower the wheelchair van and reduce the angle of the ramp. There are two styles of wheelchair ramps—one type folds up in a vertical position, and the other type slides out from the floor of the van.

New and used handicapped accessible vehicles with wheelchair ramps come with either a manual or power conversion. Power wheelchair ramps operate by remote control or by a switch located either on the dash or just inside the side-door panel. Push a button and the door slides open, the ramp extends out and, in cases where a kneeling system is needed, the van lowers. (In case of a power failure, the ramp can be easily operated manually.) Guide your wheelchair or mobility scooter inside and push the button or switch, and the system reverses. Manual systems are spring-loaded to easily fold out and retract into the van.

Wheelchair Lifts
A vehicle wheelchair lift is a mechanical device used to raise a person in a wheelchair effortlessly into a vehicle. Wheelchair lifts are typically installed in full-sized vans.

There are several wheelchair lift types: cassette lifts that slide out from under the van, horizontal folding lifts that provide users better vision through the windows, vertical folding lifts that enable passengers to enter the van without deploying the lift, and platform wheelchair lifts, which are the most basic of wheelchair lifts.

Hydraulic lifts are the most common type, since they allow for heavier steel construction and higher lift capacity. The other type is the electric lift, made with lightweight aluminum and lighter lift capacity. Lifts require either a lowered floor or a raised roof to provide enough headroom for wheelchair passengers to ride comfortably inside their chairs.

Wheelchair lifts work when space limitations or height requirements make a ramp prohibitive. Wheelchair lifts are often less expensive than a lowered-floor conversion with a ramp, but there are other considerations that include difficulty parking due to their size, high gas prices, and if the floor isn’t lowered, then the wheelchair user can’t see out the windows.

Accessibility in the Workplace

Leave a reply

With more and more people with disAbilities entering the workforce each year, the demand for increased accessibility on job sites continues to grow. While many places of employment adhere to ADA standards, there are other things to consider when looking to improve accessibility. If you’ve just started a new job or have found certain difficulties completing your duties at your current position, these two strategies can help better problematic situations.

Speak Up and Ask About Accessibility
Perhaps the building’s entrance is equipped with a ramp and automatic door opener but the door to your office or company suite is not. Maybe the accessible bathroom or stall is too small and difficult to maneuver in, or your cubicle doesn’t allow you to make turns in your chair. Most of these issues have relatively simple solutions and employers shouldn’t be hesitant to requesting changes to the building manager or scheduling the updates themselves. However, if you do not speak up and report these issues, they might go permanently unnoticed. Even if you find that your employer is not convinced that the changes are necessary, be sure to stress to them that workers are likely to be much more productive in an environment they can easily access and feel comfortable in.

If You Have a Disability Don’t Be Afraid To Ask For Help
While we wish every single building or office in the world was 100 percent accessible, sometimes people with disAbilities must work around unavoidable barriers. If you find that there are aspects or areas of your job that you cannot independently complete or access, don’t hesitate to ask for help. Whether it’s by opening a heavy door or carrying your laptop to the conference room, most of your colleagues would be happy to be of assistance. It might be especially helpful to designate a routine for a specific co-worker to help with a task you know you’ll be performing each day.

Whether it’s your first job or where you plan to retire, your place of employment should be comfortable and accessible – an environment in which you can thrive. Report issues and ask for help whenever you need it and you’ll be working towards a fulfilling and rewarding career.

How To Make Your Kitchen Wheelchair-Friendly For the Holidays

Leave a reply

Brisk air, shorter days and finding a pumpkin patch on every corner can only mean one thing—holiday season is upon us and with it come delicious feasts enjoyed with loved ones. For some of us, this also means lots of time spent in the kitchen. Whether you’re cooking, washing dishes or just gathering in the house’s social center, a kitchen that’s accessible to all family members makes for an inviting place to enjoy time together. Making your kitchen space more wheelchair-friendly can seem overwhelming, but with a few adjustments and considerations, you, and any other wheelchair user in your circle, can feel comfortable taking part in holiday traditions.

Kitchen Counters
Because the typical height of a wheelchair armrest is about 29”, a recommended counter-top height for a person using a wheelchair is a minimum of 28” and should be no higher than 34”. There should also be a space of at least 24” in height and 30” in width to accommodate the wheelchair underneath while working at the counter. This way, you, or any person with a disAbility in your family, can easily reach the counter for food preparation, storage or sneaking a bite of that side dish before it’s quite ready.

Sinks
An important tip to keep in mind when installing a wheelchair accessible sink is to place the drain near the back of the sink. This keeps a space clear of obstructions under the sink where a person using a wheelchair can move into without issue. Also be sure any hot water pipes are insulated to prevent burns. Finally, accessible kitchen sinks should be only 5” to 6 ½” deep with a single lever faucet to make for simple operation

Wall Cabinets
Lowering wall cabinets by about 3” (from the standard 18” above the counter to 15”) would make the second shelf accessible for persons in wheelchairs. By also including pullout cutting boards and drawers with full extension glides, your kitchen could be transformed into an accessible haven. An alternative solution would be to install shelving lifts inside cabinets. These will lower the shelves, and their contents, to an accessible height for those with disAbilities.

Appliances
Installing or lowering wall ovens, microwaves or other mounted appliances to approximately 31” from the floor can make them more convenient to operate from a wheelchair. When it comes to a stove-top, positioning control knobs at the front of the appliances eliminates the need to reach across a hot cooking surface and makes it easier for those with mobility limitations to feel more comfortable cooking up something yummy.

These adaptations can help make your kitchen easy to navigate and give you the perfect space to try those holiday recipes you’ve been eying.