Tag Archives: NEMEDA

Accessible Vehicles And Adaptive Mobility Equipment Q&A

Rear entry vs. side entry. Buying online. Buying used. What do you need to know to get maximum benefit for minimum expense?

Good information is the key to saving money and getting the most value for the dollar when making a big-ticket purchase like a wheelchair-accessible vehicle.

With that in mind, Seek out and find experts who truly care for answers to some common questions about adaptive mobility equipment.

Q: Can I just go to a car dealer down the street or do I need a certified mobility dealer?

A: Certified mobility dealers help consumers buy the right vehicle and adaptive mobility equipment to meet their mobility needs now and in the future. Future planning is especially important for people with muscle diseases that get progressively worse over time.

“There are so many different products out there, and technology has improved so much. We just want to help people make the right decision,” says Jim Sanders, president of Automotive Innovations based in Bridgewater, MA for over 25 years.

“Many times, consumers will go to a car dealer and buy [a vehicle] that can’t be modified or one that doesn’t fit their needs. And once you buy a vehicle, normally it’s very difficult to return it.”

The National Mobility Equipment Dealers Association (NMEDA), a nonprofit organization that provides consumer guidance and ensures quality and professionalism in the manufacturing and installation of mobility equipment. Members include mobility equipment dealers, manufacturers, driver rehabilitation specialists and other professionals.

NMEDA member-dealers must follow the safety standards established by the National Highway Traffic Safety Administration (NHTSA), in addition to NMEDA’s own stringent guidelines.

Some dealers choose to enroll in NMEDA’s Quality Assurance Program (QAP), which requires them to adhere to national motor vehicle safety standards, and use proven quality control practices to yield the highest level of performance and safety. Automotive Innovations was the First Mobility Dealer in Massachusetts to enroll and exceed the safety standards.

“The QAP dealer is audited by an outside engineering firm to verify that technicians have been trained, make sure the dealer has insurance and make sure the facility is ADA-compliant,”

So it means the QAP dealer is going above and beyond.”

Other reasons to seek out a certified mobility equipment dealer include:

They provide a link to qualified service and repair, that it’s crucial to have done on a adapted vehicle serviced.

Some manufacturers of adapted vehicles sell directly to consumers, cutting costs by cutting out the middle man, says Jim Sanders, of VMi New England, based in Bridgewater, MA.

But expert assessment and “try before you buy” remain essentials for prospective buyers, with or without a dealer in the middle.

For example, We, a NMEDA QAP-certified member, send representatives to customers’ homes for assessment and test drives before they buy, and also offer unmatched service/maintenance to just about any modified vehicle including Rollx vans.

Q: Can I get a better price if I buy online rather than from a dealer?

A: As with any online shopping, the warning “buyer beware” rings true. Buying online without trying out different vehicles with different conversions can be a costly mistake. Furthermore there are many grey market converted vans being offered as quality conversions.

Online, clients are mostly shopping blind. Typically they have no idea how the vehicle they need will even work fro them, even if they have specific recommendations from a driver evaluator or occupational therapist.

“You definitely shouldn’t buy it online,” “There not trying to assess your needs by e-mail or over the phone. There just trying to sell you something.

Some online dealers even have a questionnaire on its Web site to try and give you the idea your getting what you need. But, it will never replace being able to go to a local mobility dealership and try the vans out first hand.

A mobility vehicle is probably the second-largest purchase after a house. You should see it, try it out, and make sure it’s something that will work for you. It’s horrible when people get something that they’re disappointed in.

Every vehicle is a little bit different — such as in the dimensions, electrical and fuel systems, or suspension modifications. “If you go online and buy [based] on price, you’re not really looking at the total package.”

While buying online maybe able to save money up front, it wont over the long term.

In addition to consumers missing out on the important local service contact that a mobility equipment dealer provides, these online deals or grey market vans are worth much less when it comes time to trade it in.

Where do you want to sit? If you plan to drive from your wheelchair, then a side-entry conversion is what you’ll need, unless you can transfer to the driver’s seat (rear entry). With a rear-entry conversion, the wheelchair user typically is positioned in the back or between two mid-row captain’s seats, while a side entry offers a wheelchair user multiple seating options in the driver, front passenger and middle sections.

Q: What are some common mistakes people make when buying a modified vehicle?

A: Manufacturers and mobility dealers agree that one of the most common — and costly — mistakes is buying the vehicle first and then shopping for the conversion or adaptive mobility equipment. Not all vehicles can be converted.

For example, If you purchase a minivan from a traditional car dealership you can hit a roadblock if it doesn’t meet specific requirements to have the floor lowered for a rear- or side-entry conversion.

Q: What are some good questions to ask a dealer or manufacturer?

A: Although buying a modified vehicle can be “a daunting experience,” says VMI’s Monique McGivney, it also can be “exciting and fun when you walk in armed with good questions and information.”

Prior to getting an assessment from a mobility dealer, evaluate your needs and try answering the following questions:

  • What vehicle will fit in my garage?
  • What kind of parking issues will I encounter where I live?
  • What is the size and weight of my wheelchair?
  • What is my seated height in the wheelchair?
  • How many people will ride in the vehicle?
  • In what part of the vehicle do I want to sit?
  • Will I be able to drive with hand controls?
  • Do I want a full-size van, minivan or alternative vehicle?
  • Do I want manual or power equipment?
  • Will an in-floor ramp or fold-out ramp meet my needs?
  • What is my budget, and do I have access to supplemental funding?

The first question mobility dealers usually ask a client is: “What is your seated height in the wheelchair?” From there, the dealer can advise whether a full-size or minivan is appropriate, and what kind of conversion is needed.

Be sure to ask the dealer about the warranty and how the vehicle can be serviced.

Q: Which is better: rear entry or side entry?

A: The most important difference between a rear- and side-entry conversion is that with a rear entry, wheelchair users can’t drive from their wheelchairs nor can they ride in the front passenger seat. From there, the choice comes down to personal preference and budget.

In recent years, because of quality, convenience and cost, there’s been a shift toward side entry vehicles. Rear entry is more of a frugal modification, involves a less of conversion process and is typically a little less expensive than a side-entry conversion.

Many people prefer side entry with a in-floor conversion for many safety reasons additionally because they can park almost anywhere and not worry deploying the ramp out into traffic. Also, side entry allows the consumer to ride in the passengers front position along with maintain the rear seats in a minivan because the conversion doesn’t affect that area.

Rear entry is harder to get out of compared to a side-entry.

Anyway you look at it side-entry vehicles are more versatile. For example, side entry allows someone with a progressively worsening condition to use the vehicle for a longer period of time. A wheelchair user can start out driving from his or her chair, and then move to several other positions in the vehicle when no longer able to drive.

Side-entry conversions typically are a little more expensive than rear-entry because they’re more intrusive and labor intensive. For example, with a minivan, the entire floor and frame must be removed and replaced with a lowered floor and new frame.

Q: What’s the difference between a fold-out ramp and in-floor ramp?

A: This decision comes down to safety, aesthetics, convenience and cost.

A fold-out ramp folds up into the vehicle, takes up valuable space in the passengers front area and must be deployed whenever the door is opened.

The in-floor ramp slides under the floor, so it safer for anyone seated in the passengers front position, mid-ship position, there’s no obstruction to the door, and other passengers can enter and exit without deploying the ramp. In-floor ramps only are currently only available for side-entry minivan conversions, and there is even a manual (unpowered) option.

In-floor ramps in addition to being safer will generally provide more room in the vehicle because there’s nothing blocking the doorway. The ramp is “out of sight, out of mind and may last longer because it doesn’t have to be deployed each time the side passenger door opens.

Fold-out ramps generally cost a little less than in-floor, and consumers can select from manual and power versions; a power fold-out ramp still costs less than an in-floor ramp.

If an in-floor ramp system breaks down or the vehicle loses power, VMI’s in-floor ramp systems have a backup system (sure-deploy) that bypasses the vehicle’s battery.

A lot of people just feel more secure knowing there isn’t a fold-out ramp next to them in the event of a accident.

Q: I use a wheelchair, but a van or minivan just isn’t “me.” Are they my only options?

A: You have some choices.

Lowered-floor conversions with fold-out ramps can be done on the Honda Element, Chrysler PT Cruiser and Toyota Scion. The conversions are small and don’t fit as many people.

Due to them being built on a much smaller scale, the ones we have seen have not been built with the same level of quality of mini van conversion. Parts availability and repairs have been a problem, some of the companies that converted them are out of business and or have no support for “something they used to build”

For those who prefer to keep their standard car rather than purchasing a modified vehicle — and who can make the transfer from a wheelchair to a car seat — the answer may be as simple as a set of hand controls or a left foot gas pedal

Turning seats can be used in a wide range of vehicles, from sedans to SUVs and pickup trucks. A way to transport the wheelchair (like a rear lift) also is needed.

The rate at which your disease symptoms are worsening is one thing to consider when looking at turning seats — is it likely you’ll be able to transfer and ride in a car seat for many more years? Also, be sure to check with a mobility dealer to determine if your vehicle can accommodate a turning seat and a wheelchair lift.

Q: Why are modified vehicles so darned expensive?

A: A vehicle conversion can cost consumers upwards of $27,000 — and that’s just the cost for the conversion, not the vehicle. The total package can run between $45,000 and $80,000 — or more.

Besides the cost of the components, the reason it’s so pricey is that basically there is a lot of work involved to build a quality vehicle.

Modified vehicles from certified manufacturers and dealers must meet NHTSA’s Federal Motor Vehicle Safety Standards (FMVSS). That means all modified vehicles must be properly crash tested. (To learn more, visit www.nhtsa.dot.gov.)

It’s quite a labor-intensive process because of the customization. When you make structural modifications to a vehicle, you have to go through all of the crash testing, and you have to show that the vehicle is compliant again, and those tests are very expensive.

Most of the time lowering the floor in a minivan requires replacing or moving the fuel tank. Once the conversion is finished, the vehicle still has to meet the original requirements for evaporative emissions, in addition to NHTSA requirements.

Q: How can I pay less?

A: Consumers have some options.

Many consumers cut costs by purchasing pre-owned vehicles with new conversions, typically saving around $10,000 to $12,000.

The previous van owner already has absorbed the depreciation hit on a new van, which essentially occurs right after you’ve driven off the dealer’s lot.

Buying used can be beneficial for first-time buyers who want to try out a vehicle for a few years before buying new.

But if you plan to buy used, do some research and make sure the vehicle is structurally sound including the conversion. Ask for a vehicle history (CARFAX) report, and get the vehicle inspected by a mobility dealer to ensure it’s in good shape and was well taken care of.

Q: How do people manage to pay for it?

A: Many consumers used home equity loans to purchase a vehicle and adaptive equipment. But with home values decreasing.

Many dealers and manufacturers work with lending institutions that offer extended-term financing, including 10-year loans, allowing consumers to make lower, more affordable monthly payments. The downside is that consumers are locked into the vehicle for 10 years, and end up paying more in interest.

If you finance for 10 years, and you’re not going to keep the vehicle for that amount of time, you’re going to lose money when you try to sell or trade it because you haven’t paid off much of the balance.

When you buy a new vehicle, many car manufacturers offer mobility reimbursement programs (up to $1,000) to help offset the cost for the purchase and installation of adaptive equipment.

Wheelchair Accessible Vehicles: Q&A

Wheelchair
Accessible Vans

Rear entry Vs. Side entry
Buying New Vs. Buying Used
Manual Ramp Vs. Powered Ramp
Honda Vs. Dodge/Chrysler Vs. Toyota Vs. Ford
Certified Mobility Dealer Vs. Car Dealer Vs. Buying online
What do you need to know to get maximum benefit for minimum expense?

Good information is the key to saving money and getting the most value for the dollar when making a big-ticket purchase like a wheelchair-accessible vehicle.

With that in mind, Seek out and find experts who truly care. Here are some answers to common questions about adaptive mobility equipment.

Can I just go to a car dealer down the street or do I need a certified mobility dealer?

Certified mobility dealers will help you buy the right vehicle and adaptive mobility equipment to meet your needs now and in the future. Future planning is especially important for people with muscle diseases that get progressively worse over time.

“Technology has improved tremendously over the years so there are numerous products available. Our goal is to help people find the right equipment that best fits their needs,” says Jim Sanders, president of Automotive Innovations based in Bridgewater, MA for over 25 years.

“Many times, consumers will go to a car dealer and buy a vehicle that can’t be modified or one that doesn’t fit their needs. And once you buy a vehicle, normally it’s very difficult to return.”

The National Mobility Equipment Dealers Association (NMEDA), a nonprofit organization that provides consumer guidance and ensures quality and professionalism in the manufacturing and installation of mobility equipment. Members include mobility equipment dealers, manufacturers, driver rehabilitation specialists and other professionals.

NMEDA member-dealers must follow the safety standards established by the National Highway Traffic Safety Administration (NHTSA), in addition to NMEDA’s own stringent guidelines.

Some dealers choose to enroll in NMEDA’s Quality Assurance Program (QAP), which requires them to adhere to national motor vehicle safety standards, and use proven quality control practices to yield the highest level of performance and safety. Automotive Innovations was the First Mobility Dealer in Massachusetts to enroll and exceed the safety standards.

“The QAP dealer is audited by an outside engineering firm to verify that technicians have been trained and that the dealer has insurance and make sure the facility is ADA-compliant,” which means the QAP dealer is going above and beyond.

 

Can I get a better price if I buy online rather than from a dealer?

As with any online shopping, the warning “buyer beware” rings true. Buying online without trying out different vehicles with different conversions can be a costly mistake. Furthermore there are many grey market converted vans being offered as quality conversions.

Online, you are mostly shopping blind. Typically you will have no idea how the vehicle you need will work for you, even with specific recommendations from a driver evaluator or occupational therapist.

“You definitely shouldn’t buy a wheelchair accessible vehicle online, most online sellers are not qualified Mobility Dealers attempting to assess your needs, they’re just car dealers trying to sell you something.”

Some online dealers even have questionnaires on their websites to try and give you the idea your getting what you need. But, it will never replace being able to go to a local mobility dealership and try the vans out first hand.

A mobility vehicle is probably the second-largest purchase after a house. You should see it, try it out, and make sure it’s something that will work for you and your family. It’s horrible when people spend so much an a vehicle that will never work for them.

Every vehicle is a little bit different — such as in the dimensions, electrical and fuel systems, or suspension modifications. “If you go online and buy a wheelchair accessible vehicle based on the price, you’re not really looking at the total package.”

While buying online may be able to save you some money up front, it won’t over the long term.

In addition to you missing out on the important local service contact that a mobility equipment dealer provides, these online deals or grey market vans are worth much less when it comes time to trade it in.

 

What are some common mistakes people make when buying a modified vehicle?

Manufacturers and mobility dealers agree that one of the most common — and costly — mistakes is buying the vehicle first and then shopping for the conversion or adaptive mobility equipment. Not all vehicles can be converted.

For example, If you purchase a minivan from a traditional car dealership you can hit a roadblock if it doesn’t meet specific requirements to have the floor lowered for a rear- or side-entry conversion.

 

What are some good questions to ask a dealer or manufacturer?

Although buying a modified vehicle can be “a daunting experience,” says VMI’s Monique McGivney, it also can be “exciting and fun when you walk in armed with good questions and information.”

Prior to getting an assessment from a mobility dealer, evaluate your needs and try answering the following questions:

  • What vehicle will fit in my garage?
  • What kind of parking issues will I encounter where I live?
  • What is the size and weight of my wheelchair?
  • What is my seated height in the wheelchair?
  • How many people will ride in the vehicle?
  • In what part of the vehicle do I want to sit?
  • Will I be able to drive with hand controls?
  • Do I want a full-size van, minivan or alternative vehicle?
  • Do I want manual or power equipment?
  • Will an in-floor ramp or fold-out ramp meet my needs?
  • What is my budget, and do I have access to supplemental funding?

The first question most mobility dealers will ask you is: “What is your seated height in the wheelchair?” From there, the dealer can advise whether a full-size or minivan is appropriate, and what kind of conversion is needed.

Be sure to ask the dealer about the warranty and how the vehicle can be serviced.

Which Make and Model is the best for a handicapped accessible vehicle?

It honestly depends on what you fit into best and what options you prefer.

No two wheelchair accessible vehicles are the same. They vary in size, shape, color, features and design depending on the vehicle’s make and model. The only way to guarantee which is the best vehicle for you is if you come in and try them all out.

For example: The Honda has a little bit more room inside to maneuver a wheelchair than a Dodge, just as a Toyota has a bit more space than a Honda. A Ford offers more headroom than all of the above. But that all depends on the conversion and manufacturer.

Although color and features matter least to us, some find them just as important as fitting into the vehicle. Each Manufacturer offers their own color schemes, which you can look up on their websites. You can also search for what features you would prefer to have.

When you come into our Mobility Center we will help you find the vehicle that best fits you and your family’s needs. If you love the vehicle but not the color or features we can custom order a vehicle for you. That way we know you are buying a vehicle that best fits you and one that you are 100% happy with.

Which is better: rear entry or side entry?

The most important difference between a rear entry and side-entry conversion is that with a rear entry, wheelchair users can’t drive from their wheelchairs nor can they ride in the front passenger seat. From there, the choice comes down to personal preference and budget.

In recent years, because of quality, convenience and cost, there’s been a shift toward side entry vehicles. Rear entry is more of a frugal modification, involves a less of conversion process and is typically a little less expensive than a side-entry conversion.

Many people prefer side entry with an in-floor conversion for many safety reasons additionally  because they can park almost anywhere and not worry deploying the ramp out into traffic. Also, side entry allows the consumer to ride in the passengers front position along with maintain the rear seats in a minivan because the conversion doesn’t affect that area.

Rear entry is harder to get out of compared to a side-entry.

Anyway you look at it side-entry vehicles are more versatile. For example, side entry allows someone with a progressively worsening condition to use the vehicle for a longer period of time. A wheelchair user can start out driving from his or her chair, and then move to several other positions in the vehicle when no longer able to drive.

Side-entry conversions typically are a little more expensive than rear-entry because they’re more intrusive and labor intensive. For example, with a minivan, the entire floor and frame must be removed and replaced with a lowered floor and new frame.


What’s the difference between a fold-out ramp and in-floor ramp?

This decision comes down to safety, aesthetics, convenience and cost.

A fold-out ramp folds up into the vehicle, takes up valuable space in the passengers front area and must be deployed whenever the door is opened.

The in-floor ramp slides under the floor which makes riding in the vehicle safer for anyone seated in the passengers front position or the mid-ship position. There is no obstruction to the doorway so other passengers can enter and exit without deploying the ramp. In-floor ramps are currently only available as a side-entry minivan conversion, but they offer a manual (un-powered) option as well.

In-floor ramps in addition to being safer will generally provide more room in the vehicle because there’s nothing blocking the doorway. The ramp is “out of sight, out of mind” and may last longer because it doesn’t have to be deployed each time the side passenger door opens.

Fold-out ramps generally cost a little less than an in-floor ramp and consumers can select from manual and power versions; a power fold-out ramp still costs less than an in-floor ramp.

If an in-floor ramp system breaks down or the vehicle loses power, VMI’s in-floor ramp systems have a backup system (sure-deploy) that bypasses the vehicle’s battery.

A lot of people just feel more secure knowing there isn’t a fold-out ramp next to them in the event of a accident.

I use a wheelchair, but a van or minivan just isn’t “me.” Are they my only options?

You have other choices.

Lowered-floor conversions with fold-out ramps can be done on the Honda Element, Chrysler PT Cruiser and Toyota Scion. The conversions are small and don’t fit as many people.

Due to them being built on a much smaller scale, the ones we have seen have not been built with the same level of quality as the minivan conversion. Parts availability and repairs have been a problem, some of the companies that converted them are out of business and or have no support for “something they used to build”

If you prefer to keep your standard car rather than purchasing a modified vehicle — and can make the transfer from a wheelchair to a car seat — the answer may be as simple as a set of hand controls or a left foot gas pedal

Turning seats can be used in a wide range of vehicles, from sedans to SUVs and pickup trucks. A way to transport the wheelchair (like a rear lift) also is needed.

The rate at which your symptoms worsen is one thing to consider when looking at turning seats — is it likely you’ll be able to transfer and ride in a car seat for many more years? Also, be sure to check with a mobility dealer to determine if your vehicle can accommodate a turning seat and a wheelchair lift.

Why are modified vehicles so  expensive?

A vehicle conversion can cost consumers upwards of $27,000 —  and that’s just the cost for the conversion, not the vehicle. The total package can run between $45,000 and $80,000 — or more.

Besides the cost of the components, the reason it’s so pricey is that basically there is a lot of work involved to build a quality vehicle.

Modified vehicles from certified manufacturers and dealers must meet NHTSA’s Federal Motor Vehicle Safety Standards (FMVSS). That means all modified vehicles must be properly crash tested. (To learn more, visit www.nhtsa.dot.gov.)

It’s quite a labor-intensive process because of the customization. When you make structural modifications to a vehicle, you have to go through all of the crash testing, and you have to show that the vehicle is compliant again, and those tests are very expensive.

Most of the time lowering the floor in a minivan requires replacing or moving the fuel tank. Once the conversion is finished, the vehicle still has to meet the original requirements for evaporative emissions, in addition to NHTSA requirements.

How can I pay less?

You have  a few options.

You could cut costs by purchasing a pre-owned vehicle with a new conversion, typically saving you around $10,000 to $12,000.

The previous van owner already has absorbed the depreciation hit on a new van, which essentially occurs right after they’ve driven off the dealer’s lot.

Buying used can be beneficial for first-time buyers who want to try out a vehicle for a few years before buying new.

But if you plan to buy used, do some research and make sure the vehicle is structurally sound including the conversion. Ask for a vehicle history (CARFAX) report, and get the vehicle inspected by a mobility dealer to ensure it’s in good shape and was well taken care of.

Another tactic to help save you money is to ask your Certified Mobility Dealer about any rebates or financial aid options that could benefit you.

How do people manage to pay for it?

Many consumers used home equity loans to purchase a vehicle and adaptive equipment.

Many dealers and manufacturers work with lending institutions that offer extended-term financing, including 10-year loans, allowing consumers to make lower, more affordable monthly payments. The downside is that consumers are locked into the vehicle for 10 years, and end up paying more in interest.

If you finance for 10 years, and you’re not going to keep the vehicle for that amount of time, you’re going to lose money when you try to sell or trade it because you haven’t paid off much of the balance.

When you buy a new vehicle, many car manufacturers offer mobility reimbursement programs (up to $1,000) to help offset the cost for the purchase and installation of adaptive equipment.

Wheelchair Accessible Vehicles: Q&A

Wheelchair
Accessible Vans

Rear entry Vs. Side entry
Buying New Vs. Buying Used
Manual Ramp Vs. Powered Ramp
Honda Vs. Dodge/Chrysler Vs. Toyota Vs. Ford
Certified Mobility Dealer Vs. Car Dealer Vs. Buying online
What do you need to know to get maximum benefit for minimum expense?

Good information is the key to saving money and getting the most value for the dollar when making a big-ticket purchase like a wheelchair-accessible vehicle.

With that in mind, Seek out and find experts who truly care. Here are some answers to common questions about adaptive mobility equipment.

Can I just go to a car dealer down the street or do I need a certified mobility dealer?

Certified mobility dealers will help you buy the right vehicle and adaptive mobility equipment to meet your needs now and in the future. Future planning is especially important for people with muscle diseases that get progressively worse over time.

“Technology has improved tremendously over the years so there are numerous products available. Our goal is to help people find the right equipment that best fits their needs,” says Jim Sanders, president of Automotive Innovations based in Bridgewater, MA for over 25 years.

“Many times, consumers will go to a car dealer and buy a vehicle that can’t be modified or one that doesn’t fit their needs. And once you buy a vehicle, normally it’s very difficult to return.”

The National Mobility Equipment Dealers Association (NMEDA), a nonprofit organization that provides consumer guidance and ensures quality and professionalism in the manufacturing and installation of mobility equipment. Members include mobility equipment dealers, manufacturers, driver rehabilitation specialists and other professionals.

NMEDA member-dealers must follow the safety standards established by the National Highway Traffic Safety Administration (NHTSA), in addition to NMEDA’s own stringent guidelines.

Some dealers choose to enroll in NMEDA’s Quality Assurance Program (QAP), which requires them to adhere to national motor vehicle safety standards, and use proven quality control practices to yield the highest level of performance and safety. Automotive Innovations was the First Mobility Dealer in Massachusetts to enroll and exceed the safety standards.

“The QAP dealer is audited by an outside engineering firm to verify that technicians have been trained and that the dealer has insurance and make sure the facility is ADA-compliant,” which means the QAP dealer is going above and beyond.

 

Can I get a better price if I buy online rather than from a dealer?

As with any online shopping, the warning “buyer beware” rings true. Buying online without trying out different vehicles with different conversions can be a costly mistake. Furthermore there are many grey market converted vans being offered as quality conversions.

Online, you are mostly shopping blind. Typically you will have no idea how the vehicle you need will work for you, even with specific recommendations from a driver evaluator or occupational therapist.

“You definitely shouldn’t buy a wheelchair accessible vehicle online, most online sellers are not qualified Mobility Dealers attempting to assess your needs, they’re just car dealers trying to sell you something.”

Some online dealers even have questionnaires on their websites to try and give you the idea your getting what you need. But, it will never replace being able to go to a local mobility dealership and try the vans out first hand.

A mobility vehicle is probably the second-largest purchase after a house. You should see it, try it out, and make sure it’s something that will work for you and your family. It’s horrible when people spend so much an a vehicle that will never work for them.

Every vehicle is a little bit different — such as in the dimensions, electrical and fuel systems, or suspension modifications. “If you go online and buy a wheelchair accessible vehicle based on the price, you’re not really looking at the total package.”

While buying online may be able to save you some money up front, it won’t over the long term.

In addition to you missing out on the important local service contact that a mobility equipment dealer provides, these online deals or grey market vans are worth much less when it comes time to trade it in.

 

What are some common mistakes people make when buying a modified vehicle?

Manufacturers and mobility dealers agree that one of the most common — and costly — mistakes is buying the vehicle first and then shopping for the conversion or adaptive mobility equipment. Not all vehicles can be converted.

For example, If you purchase a minivan from a traditional car dealership you can hit a roadblock if it doesn’t meet specific requirements to have the floor lowered for a rear- or side-entry conversion.

 

What are some good questions to ask a dealer or manufacturer?

Although buying a modified vehicle can be “a daunting experience,” says VMI’s Monique McGivney, it also can be “exciting and fun when you walk in armed with good questions and information.”

Prior to getting an assessment from a mobility dealer, evaluate your needs and try answering the following questions:

  • What vehicle will fit in my garage?
  • What kind of parking issues will I encounter where I live?
  • What is the size and weight of my wheelchair?
  • What is my seated height in the wheelchair?
  • How many people will ride in the vehicle?
  • In what part of the vehicle do I want to sit?
  • Will I be able to drive with hand controls?
  • Do I want a full-size van, minivan or alternative vehicle?
  • Do I want manual or power equipment?
  • Will an in-floor ramp or fold-out ramp meet my needs?
  • What is my budget, and do I have access to supplemental funding?

The first question most mobility dealers will ask you is: “What is your seated height in the wheelchair?” From there, the dealer can advise whether a full-size or minivan is appropriate, and what kind of conversion is needed.

Be sure to ask the dealer about the warranty and how the vehicle can be serviced.

Which Make and Model is the best for a handicapped accessible vehicle?

It honestly depends on what you fit into best and what options you prefer.

No two wheelchair accessible vehicles are the same. They vary in size, shape, color, features and design depending on the vehicle’s make and model. The only way to guarantee which is the best vehicle for you is if you come in and try them all out.

For example: The Honda has a little bit more room inside to maneuver a wheelchair than a Dodge, just as a Toyota has a bit more space than a Honda. A Ford offers more headroom than all of the above. But that all depends on the conversion and manufacturer.

Although color and features matter least to us, some find them just as important as fitting into the vehicle. Each Manufacturer offers their own color schemes, which you can look up on their websites. You can also search for what features you would prefer to have.

When you come into our Mobility Center we will help you find the vehicle that best fits you and your family’s needs. If you love the vehicle but not the color or features we can custom order a vehicle for you. That way we know you are buying a vehicle that best fits you and one that you are 100% happy with.

Which is better: rear entry or side entry?

The most important difference between a rear entry and side-entry conversion is that with a rear entry, wheelchair users can’t drive from their wheelchairs nor can they ride in the front passenger seat. From there, the choice comes down to personal preference and budget.

In recent years, because of quality, convenience and cost, there’s been a shift toward side entry vehicles. Rear entry is more of a frugal modification, involves a less of conversion process and is typically a little less expensive than a side-entry conversion.

Many people prefer side entry with an in-floor conversion for many safety reasons additionally  because they can park almost anywhere and not worry deploying the ramp out into traffic. Also, side entry allows the consumer to ride in the passengers front position along with maintain the rear seats in a minivan because the conversion doesn’t affect that area.

Rear entry is harder to get out of compared to a side-entry.

Anyway you look at it side-entry vehicles are more versatile. For example, side entry allows someone with a progressively worsening condition to use the vehicle for a longer period of time. A wheelchair user can start out driving from his or her chair, and then move to several other positions in the vehicle when no longer able to drive.

Side-entry conversions typically are a little more expensive than rear-entry because they’re more intrusive and labor intensive. For example, with a minivan, the entire floor and frame must be removed and replaced with a lowered floor and new frame.


What’s the difference between a fold-out ramp and in-floor ramp?

This decision comes down to safety, aesthetics, convenience and cost.

A fold-out ramp folds up into the vehicle, takes up valuable space in the passengers front area and must be deployed whenever the door is opened.

The in-floor ramp slides under the floor which makes riding in the vehicle safer for anyone seated in the passengers front position or the mid-ship position. There is no obstruction to the doorway so other passengers can enter and exit without deploying the ramp. In-floor ramps are currently only available as a side-entry minivan conversion, but they offer a manual (un-powered) option as well.

In-floor ramps in addition to being safer will generally provide more room in the vehicle because there’s nothing blocking the doorway. The ramp is “out of sight, out of mind” and may last longer because it doesn’t have to be deployed each time the side passenger door opens.

Fold-out ramps generally cost a little less than an in-floor ramp and consumers can select from manual and power versions; a power fold-out ramp still costs less than an in-floor ramp.

If an in-floor ramp system breaks down or the vehicle loses power, VMI’s in-floor ramp systems have a backup system (sure-deploy) that bypasses the vehicle’s battery.

A lot of people just feel more secure knowing there isn’t a fold-out ramp next to them in the event of a accident.

I use a wheelchair, but a van or minivan just isn’t “me.” Are they my only options?

You have other choices.

Lowered-floor conversions with fold-out ramps can be done on the Honda Element, Chrysler PT Cruiser and Toyota Scion. The conversions are small and don’t fit as many people.

Due to them being built on a much smaller scale, the ones we have seen have not been built with the same level of quality as the minivan conversion. Parts availability and repairs have been a problem, some of the companies that converted them are out of business and or have no support for “something they used to build”

If you prefer to keep your standard car rather than purchasing a modified vehicle — and can make the transfer from a wheelchair to a car seat — the answer may be as simple as a set of hand controls or a left foot gas pedal

Turning seats can be used in a wide range of vehicles, from sedans to SUVs and pickup trucks. A way to transport the wheelchair (like a rear lift) also is needed.

The rate at which your symptoms worsen is one thing to consider when looking at turning seats — is it likely you’ll be able to transfer and ride in a car seat for many more years? Also, be sure to check with a mobility dealer to determine if your vehicle can accommodate a turning seat and a wheelchair lift.

Why are modified vehicles so  expensive?

A vehicle conversion can cost consumers upwards of $27,000 —  and that’s just the cost for the conversion, not the vehicle. The total package can run between $45,000 and $80,000 — or more.

Besides the cost of the components, the reason it’s so pricey is that basically there is a lot of work involved to build a quality vehicle.

Modified vehicles from certified manufacturers and dealers must meet NHTSA’s Federal Motor Vehicle Safety Standards (FMVSS). That means all modified vehicles must be properly crash tested. (To learn more, visit www.nhtsa.dot.gov.)

It’s quite a labor-intensive process because of the customization. When you make structural modifications to a vehicle, you have to go through all of the crash testing, and you have to show that the vehicle is compliant again, and those tests are very expensive.

Most of the time lowering the floor in a minivan requires replacing or moving the fuel tank. Once the conversion is finished, the vehicle still has to meet the original requirements for evaporative emissions, in addition to NHTSA requirements.

How can I pay less?

You have  a few options.

You could cut costs by purchasing a pre-owned vehicle with a new conversion, typically saving you around $10,000 to $12,000.

The previous van owner already has absorbed the depreciation hit on a new van, which essentially occurs right after they’ve driven off the dealer’s lot.

Buying used can be beneficial for first-time buyers who want to try out a vehicle for a few years before buying new.

But if you plan to buy used, do some research and make sure the vehicle is structurally sound including the conversion. Ask for a vehicle history (CARFAX) report, and get the vehicle inspected by a mobility dealer to ensure it’s in good shape and was well taken care of.

Another tactic to help save you money is to ask your Certified Mobility Dealer about any rebates or financial aid options that could benefit you.

How do people manage to pay for it?

Many consumers used home equity loans to purchase a vehicle and adaptive equipment.

Many dealers and manufacturers work with lending institutions that offer extended-term financing, including 10-year loans, allowing consumers to make lower, more affordable monthly payments. The downside is that consumers are locked into the vehicle for 10 years, and end up paying more in interest.

If you finance for 10 years, and you’re not going to keep the vehicle for that amount of time, you’re going to lose money when you try to sell or trade it because you haven’t paid off much of the balance.

When you buy a new vehicle, many car manufacturers offer mobility reimbursement programs (up to $1,000) to help offset the cost for the purchase and installation of adaptive equipment.

NEMEDA: Play It Forward For a Chance to Win $500!

NMEDA has started another contest on Facebook!!!!

Play It Forward For a Chance to Win $500! banner

They wants to hear how you are keeping “Life Moving Forward” through our Play It Forward Video Contest.

The Mission: The NMEDA team wants to encourage the community living with disabilities to keep Life Moving Forward through your favorite activity. Become a “NMEDA Player” by following the simple video instructions below, and upload it to our Play It Forward App on the NMEDA Facebook Page. Let your friends and family know about your entry in the contest and encourage them to vote for your video. The Player with the most votes will becoming the Fan Favorite.

It’s as easy as 1, 2, and 3!

Play It Forward For a Chance to Win $500!

The Reward:  MULTIPLE NMEDA PLAYERS HAVE THE CHANCE to be featured in our upcoming promotions. Those entrants selected by NMEDA for video use will receive a cash prize of $500. The Fan Favorite – the Player who receives the most votes through the app by August 30th – is guaranteed to be featured, and will also receive a $500 cash prize.

Required Video Specs:

  • Your high-quality video must not exceed 2 minutes.
  • It must be shot horizontally and the NMEDA Player must be positioned in the center of the video.

Preferred Video Specs:

  • 1080p (1920×1080) at 30fps or 720p (1280×960) at 30fps

The following link leads to a sample video of our local hero, Courtney Boyll, sharing how she plays it forward.
*Note: Players only need to use their first name.

Click here to view Courtney’s video: http://bit.ly/NMEDAPlayItForward

NEMEDA’S Local Heroes Announced

 

VMI was proud to team with the National Mobility Equipment Dealers Association (NMEDA) and sponsor the 2014 Local Heroes Contest by donating their Toyota Northstar conversion. The contest has just ended and four lucky winners (with the help of their respective communities) each won a new wheelchair accessible van.

Courtney Boyll – a 3rd grade teacher from Moulton, Alabama – was the recipient of the VMI Toyota Northstar conversion van. She embodies the VMI spirit of ‘”Imagine Possibilities”.

“Do not give up on your dream of mobility freedom,” she said, “Keep believing. Because when you believe good things, all things are possible.”

Watch Courtney’s inspirational submission video here: http://bit.ly/CourtneysStory

NEMEDA’s Local Heroes Contest for 2014 Winners Contacted

The winners of National Mobility Awareness Month have been contacted officially ending the Local Heroes Contest for 2014.

The Four lucky winners will be announced next week!

At least 10 other individuals throughout the contest period have been donated vehicles through other means. We hope these individuals will inspire you to continue to share your story in your local community.

NEMEDA’s 2014 Local Hero Contest Winner Announced In A Week!

NEMEDA thanks everyone (more than 4 million people) who submitted and voted for their Local Heroes as part of National Mobility Awareness Month. Entering a Local Hero story and Voting is now closed and the top 10% of the entries in each of the categories (caregivers, seniors and general) with the most votes are being reviewed by an independent panel of judges.

Please note: There are three categories in which Heroes could have of entered. We have pulled the top 10% in each category so if you have more votes than another Hero and you did not make the top 10%, it was because you were in a different category than what they entered.

The four finalists will be contacted by a National Mobility Equipment Dealers Association (NMEDA) representative by May 30, 2014.

Everyone Has A Story To Tell: Help A Local Hero Win A New Wheelchair Van!

Everyone Has A Story To Tell Help A Local Hero Win A New Wheelchair Van
Who Is A Local Hero?

  • Local Heroes can be Defined as People who Volunteer, Educate, Advocate, Achieve, and Persevere.

Whether you are living with a disability or have dedicated your time to helping someone who is, we want to hear what makes you/them a Local Hero.

How To Enter

  1. Get the Promo Code From your Local Dealer (including us: 508-697-6006)
  2. Complete the Local Hero Entry Form and include either a written story or a video.
    • Written: Write up to 400 words with a picture of the local hero (1MB or less).
    • Video: Make a YouTube video that is no longer than 2 minutes.
  3. Preview your Story and Submit your Local Hero Entry Form here

Important Dates

  • February 25, 2014 – NMEDA will begin accepting Local Hero entries
  • March 11, 2014 – Public voting begins — Click here to vote
  • May 9, 2014  – Local Hero entries and voting end
  • May 30, 2014 – The Local Hero Winners are contacted
  • June 2014 – Local Heroes will publicly be announced
  • June/August 2014 – Wheelchair Accessible vehicles will be delivered

NEMEDA Local Hero Contest – Enter or Vote Today!

NEMEDA Local Hero Contest – Enter or Vote Today!
May 2014 is National Mobility Awareness Month

National Mobility Awareness Month is dedicated to showing the world how people with disabilities can live active, mobile lifestyles.

Did you know?

  • Over 18 million people in the U.S. and Canada have mobility issues
  • People with disabilities constitute the largest minority group in the United States and the only group anyone can become a member of at anytime
  • One in five elderly have mobility issues
  • There are mobility equipment manufacturers, dealers and certified driver rehabilitation specialists in your community dedicated to improving the lives of people with disabilities
  • Automotive mobility solutions are available for people with disabilities, enabling them to enjoy active, mobile lifestyles

Who Is A Local Hero?

  • Local Heroes can be Defined as People who Volunteer, Educate, Advocate, Achieve, and Persevere.

Whether you are living with a disability or have dedicated your time to helping someone who is, we want to hear what makes you/them a Local Hero.

How To Enter

  1. Get the Promo Code From your Local Dealer (including us: 508-697-6006)
  2. Complete the Local Hero Entry Form and include either a written story or a video.
    • Written: Write up to 400 words with a picture of the local hero (1MB or less).
    • Video: Make a YouTube video that is no longer than 2 minutes.
  3. Preview your Story and Submit your Local Hero Entry Form here

Important Dates

  • February 25, 2014 – NMEDA will begin accepting Local Hero entries
  • March 11, 2014 – Public voting begins — Click here to vote
  • May 9, 2014 – Local Hero entries and voting end
  • May 30, 2014 – The Local Hero Winners are contacted
  • June 2014 – Local Heroes will publicly be announced
  • June/August 2014 – Wheelchair Accessible vehicles will be delivered

NEMEDA Local Hero Contest – Enter Today!

The National Mobility Equipment Dealers Association (NMEDA) is a non-profit organization dedicated to expanding mobility options for people with disabilities.

The National Mobility Equipment Dealers Association (NMEDA) is a non-profit organization dedicated to expanding mobility options for people with disabilities.

May 2014 is National Mobility Awareness Month
National Mobility Awareness Month is dedicated to showing the world how people with disabilities can live active, mobile lifestyles.

Did you know?

  • Over 18 million people in the U.S. and Canada have mobility issues
  • People with disabilities constitute the largest minority group in the United States and the only group anyone can become a member of at anytime
  • One in five elderly have mobility issues
  • There are mobility equipment manufacturers, dealers and certified driver rehabilitation specialists in your community dedicated to improving the lives of people with disabilities
  • Automotive mobility solutions are available for people with disabilities, enabling them to enjoy active, mobile lifestyles

Who Is A Local Hero?

  • Local Heroes can be Defined as People who Volunteer, Educate, Advocate, Achieve, and Persevere.

Whether you are living with a disability or have dedicated your time to helping someone who is, we want to hear what makes you/them a Local Hero.

How To Enter

  1. Get the Promo Code From your Local Dealer (including us: 508-697-6006)
  2. Complete the Local Hero Entry Form and include either a written story or a video.
    • Written: Write up to 400 words with a picture of the local hero that is 1MB or less.
    • Video: Make a YouTube video that is no longer than 2 minutes.
  3. Preview your Story and Submit your Local Hero Entry Form here

 

Important Dates

  • February 25, 2014 – NMEDA will begin accepting Local Hero entries
  • March 11, 2014 – Public voting begins
  • May 9, 2014 – Local Hero entries and voting end
  • May 30, 2014 – The Local Hero Winners are contacted
  • June 2014 – Local Heroes will publicly be announced
  • June/August 2014 – Wheelchair Accessible vehicles will be delivered

Accessible Vehicles And Adaptive Mobility Equipment Q&A

Accessible Vehicles and Adaptive Mobility Equipment Q&A

Rear entry vs. side entry. Buying online. Buying used. What do you need to know to get maximum benefit for minimum expense?

Good information is the key to saving money and getting the most value for the dollar when making a big-ticket purchase like a wheelchair-accessible vehicle.

With that in mind, Seek out and find experts who truly care for answers to some common questions about adaptive mobility equipment.

Q: Can I just go to a car dealer down the street or do I need a certified mobility dealer?

A: Certified mobility dealers help consumers buy the right vehicle and adaptive mobility equipment to meet their mobility needs now and in the future. Future planning is especially important for people with muscle diseases that get progressively worse over time.

“There are so many different products out there, and technology has improved so much. We just want to help people make the right decision,” says Jim Sanders, president of Automotive Innovations based in Bridgewater, MA for over 25 years.

“Many times, consumers will go to a car dealer and buy [a vehicle] that can’t be modified or one that doesn’t fit their needs. And once you buy a vehicle, normally it’s very difficult to return it.”

The National Mobility Equipment Dealers Association (NMEDA), a nonprofit organization that provides consumer guidance and ensures quality and professionalism in the manufacturing and installation of mobility equipment. Members include mobility equipment dealers, manufacturers, driver rehabilitation specialists and other professionals.

NMEDA member-dealers must follow the safety standards established by the National Highway Traffic Safety Administration (NHTSA), in addition to NMEDA’s own stringent guidelines.

Some dealers choose to enroll in NMEDA’s Quality Assurance Program (QAP), which requires them to adhere to national motor vehicle safety standards, and use proven quality control practices to yield the highest level of performance and safety. Automotive Innovations was the First Mobility Dealer in Massachusetts to enroll and exceed the safety standards.

“The QAP dealer is audited by an outside engineering firm to verify that technicians have been trained, make sure the dealer has insurance and make sure the facility is ADA-compliant,”

So it means the QAP dealer is going above and beyond.”

Other reasons to seek out a certified mobility equipment dealer include:

They provide a link to qualified service and repair, that it’s crucial to have done on a adapted vehicle serviced.

Some manufacturers of adapted vehicles sell directly to consumers, cutting costs by cutting out the middle man, says Jim Sanders, of VMi New England, based in Bridgewater, MA.

But expert assessment and “try before you buy” remain essentials for prospective buyers, with or without a dealer in the middle.

For example, We, a NMEDA QAP-certified member, send representatives to customers’ homes for assessment and test drives before they buy, and also offer unmatched service/maintenance to just about any modified vehicle including Rollx vans.

Q: Can I get a better price if I buy online rather than from a dealer?

A: As with any online shopping, the warning “buyer beware” rings true. Buying online without trying out different vehicles with different conversions can be a costly mistake. Furthermore there are many grey market converted vans being offered as quality conversions.

Online, clients are mostly shopping blind. Typically they have no idea how the vehicle they need will even work fro them, even if they have specific recommendations from a driver evaluator or occupational therapist.

“You definitely shouldn’t buy it online,” “There not trying to assess your needs by e-mail or over the phone. There just trying to sell you something.

Some online dealers even have a questionnaire on its Web site to try and give you the idea your getting what you need. But, it will never replace being able to go to a local mobility dealership and try the vans out first hand.

A mobility vehicle is probably the second-largest purchase after a house. You should see it, try it out, and make sure it’s something that will work for you. It’s horrible when people get something that they’re disappointed in.

Every vehicle is a little bit different — such as in the dimensions, electrical and fuel systems, or suspension modifications. “If you go online and buy [based] on price, you’re not really looking at the total package.”

While buying online maybe able to save money up front, it wont over the long term.

In addition to consumers missing out on the important local service contact that a mobility equipment dealer provides, these online deals or grey market vans are worth much less when it comes time to trade it in.

Where do you want to sit? If you plan to drive from your wheelchair, then a side-entry conversion is what you’ll need, unless you can transfer to the driver’s seat (rear entry). With a rear-entry conversion, the wheelchair user typically is positioned in the back or between two mid-row captain’s seats, while a side entry offers a wheelchair user multiple seating options in the driver, front passenger and middle sections.

Q: What are some common mistakes people make when buying a modified vehicle?

A: Manufacturers and mobility dealers agree that one of the most common — and costly — mistakes is buying the vehicle first and then shopping for the conversion or adaptive mobility equipment. Not all vehicles can be converted.

For example, If you purchase a minivan from a traditional car dealership you can hit a roadblock if it doesn’t meet specific requirements to have the floor lowered for a rear- or side-entry conversion.

Q: What are some good questions to ask a dealer or manufacturer?

A: Although buying a modified vehicle can be “a daunting experience,” says VMI’s Monique McGivney, it also can be “exciting and fun when you walk in armed with good questions and information.”

Prior to getting an assessment from a mobility dealer, evaluate your needs and try answering the following questions:

  • What vehicle will fit in my garage?
  • What kind of parking issues will I encounter where I live?
  • What is the size and weight of my wheelchair?
  • What is my seated height in the wheelchair?
  • How many people will ride in the vehicle?
  • In what part of the vehicle do I want to sit?
  • Will I be able to drive with hand controls?
  • Do I want a full-size van, minivan or alternative vehicle?
  • Do I want manual or power equipment?
  • Will an in-floor ramp or fold-out ramp meet my needs?
  • What is my budget, and do I have access to supplemental funding?

The first question mobility dealers usually ask a client is: “What is your seated height in the wheelchair?” From there, the dealer can advise whether a full-size or minivan is appropriate, and what kind of conversion is needed.

Be sure to ask the dealer about the warranty and how the vehicle can be serviced.

Q: Which is better: rear entry or side entry?

A: The most important difference between a rear- and side-entry conversion is that with a rear entry, wheelchair users can’t drive from their wheelchairs nor can they ride in the front passenger seat. From there, the choice comes down to personal preference and budget.

In recent years, because of quality, convenience and cost, there’s been a shift toward side entry vehicles. Rear entry is more of a frugal modification, involves a less of conversion process and is typically a little less expensive than a side-entry conversion.

Many people prefer side entry with a in-floor conversion for many safety reasons additionally because they can park almost anywhere and not worry deploying the ramp out into traffic. Also, side entry allows the consumer to ride in the passengers front position along with maintain the rear seats in a minivan because the conversion doesn’t affect that area.

Rear entry is harder to get out of compared to a side-entry.

Anyway you look at it side-entry vehicles are more versatile. For example, side entry allows someone with a progressively worsening condition to use the vehicle for a longer period of time. A wheelchair user can start out driving from his or her chair, and then move to several other positions in the vehicle when no longer able to drive.

Side-entry conversions typically are a little more expensive than rear-entry because they’re more intrusive and labor intensive. For example, with a minivan, the entire floor and frame must be removed and replaced with a lowered floor and new frame.

Q: What’s the difference between a fold-out ramp and in-floor ramp?

A: This decision comes down to safety, aesthetics, convenience and cost.

A fold-out ramp folds up into the vehicle, takes up valuable space in the passengers front area and must be deployed whenever the door is opened.

The in-floor ramp slides under the floor, so it safer for anyone seated in the passengers front position, mid-ship position, there’s no obstruction to the door, and other passengers can enter and exit without deploying the ramp. In-floor ramps only are currently only available for side-entry minivan conversions, and there is even a manual (unpowered) option.

In-floor ramps in addition to being safer will generally provide more room in the vehicle because there’s nothing blocking the doorway. The ramp is “out of sight, out of mind and may last longer because it doesn’t have to be deployed each time the side passenger door opens.

Fold-out ramps generally cost a little less than in-floor, and consumers can select from manual and power versions; a power fold-out ramp still costs less than an in-floor ramp.

If an in-floor ramp system breaks down or the vehicle loses power, VMI’s in-floor ramp systems have a backup system (sure-deploy) that bypasses the vehicle’s battery.

A lot of people just feel more secure knowing there isn’t a fold-out ramp next to them in the event of a accident.

Q: I use a wheelchair, but a van or minivan just isn’t “me.” Are they my only options?

A: You have some choices.

Lowered-floor conversions with fold-out ramps can be done on the Honda Element, Chrysler PT Cruiser and Toyota Scion. The conversions are small and don’t fit as many people.

Due to them being built on a much smaller scale, the ones we have seen have not been built with the same level of quality of mini van conversion. Parts availability and repairs have been a problem, some of the companies that converted them are out of business and or have no support for “something they used to build”

For those who prefer to keep their standard car rather than purchasing a modified vehicle — and who can make the transfer from a wheelchair to a car seat — the answer may be as simple as a set of hand controls or a left foot gas pedal

Turning seats can be used in a wide range of vehicles, from sedans to SUVs and pickup trucks. A way to transport the wheelchair (like a rear lift) also is needed.

The rate at which your disease symptoms are worsening is one thing to consider when looking at turning seats — is it likely you’ll be able to transfer and ride in a car seat for many more years? Also, be sure to check with a mobility dealer to determine if your vehicle can accommodate a turning seat and a wheelchair lift.

Q: Why are modified vehicles so darned expensive?

A: A vehicle conversion can cost consumers upwards of $27,000 — and that’s just the cost for the conversion, not the vehicle. The total package can run between $45,000 and $80,000 — or more.

Besides the cost of the components, the reason it’s so pricey is that basically there is a lot of work involved to build a quality vehicle.

Modified vehicles from certified manufacturers and dealers must meet NHTSA’s Federal Motor Vehicle Safety Standards (FMVSS). That means all modified vehicles must be properly crash tested. (To learn more, visit www.nhtsa.dot.gov.)

It’s quite a labor-intensive process because of the customization. When you make structural modifications to a vehicle, you have to go through all of the crash testing, and you have to show that the vehicle is compliant again, and those tests are very expensive.

Most of the time lowering the floor in a minivan requires replacing or moving the fuel tank. Once the conversion is finished, the vehicle still has to meet the original requirements for evaporative emissions, in addition to NHTSA requirements.

Q: How can I pay less?

A: Consumers have some options.

Many consumers cut costs by purchasing pre-owned vehicles with new conversions, typically saving around $10,000 to $12,000.

The previous van owner already has absorbed the depreciation hit on a new van, which essentially occurs right after you’ve driven off the dealer’s lot.

Buying used can be beneficial for first-time buyers who want to try out a vehicle for a few years before buying new.

But if you plan to buy used, do some research and make sure the vehicle is structurally sound including the conversion. Ask for a vehicle history (CARFAX) report, and get the vehicle inspected by a mobility dealer to ensure it’s in good shape and was well taken care of.

Q: How do people manage to pay for it?

A: Many consumers used home equity loans to purchase a vehicle and adaptive equipment. But with home values decreasing.

Many dealers and manufacturers work with lending institutions that offer extended-term financing, including 10-year loans, allowing consumers to make lower, more affordable monthly payments. The downside is that consumers are locked into the vehicle for 10 years, and end up paying more in interest.

If you finance for 10 years, and you’re not going to keep the vehicle for that amount of time, you’re going to lose money when you try to sell or trade it because you haven’t paid off much of the balance.

When you buy a new vehicle, many car manufacturers offer mobility reimbursement programs (up to $1,000) to help offset the cost for the purchase and installation of adaptive equipment.