Tag Archives: financial assistance

Putting Amputees Back in the Driver’s Seat

For some people, an automobile is a necessity not a luxury.

To have a full life in America requires mobility -not just the ability to walk or run, but the ability to travel greater distances with more convenience and flexibility than public transportation provides.

For many lower-limb amputees, however, the lack of feet makes driving impossible in a conventionally equipped vehicle. Hand controls along with left foot gas pedals provide the solution. They make it possible for lower-limb amputees and people with other disabilities to enjoy the prosperity and independence that comes with vehicle ownership and use.

Different types of hand controls
Basic hand controls usually consist of a lever attached to a bracket and mounted under the steering column on cars equipped with automatic transmissions. The lever is moved to operate throttle and brakes. Usually the left hand operates the control, allowing the right hand to steer and operate the vehicle’s accessories. The three most common types of hand controls are push/rock, push/twist, right angle pull, and push/pull.

The push rock and push twist hand control works by twisting the handle to apply the gas and pushing it to apply the brakes. The right angle pull hand control works by moving the lever down towards the driver’s lap for acceleration. To apply the brakes, the driver pushes the handle forward towards the front of the car. The push/pull hand control works by pulling on the handle to apply the gas, and pushing for the brakes. Most hand controls, except for a very few, apply the brakes by pushing.

Most hand controls are hand-powered, using linkages or cables to operate the gas and brakes. Some models are power-assisted to make it easier on the hand and arm. Cars are designed for the driver’s foot to operate the gas and brake, so the force required to operate the hand control can be tiring to the hand during long drives. Power-assist options for hand controls range from very complex devices such as an electric joystick, to relatively simple ones that use vacuum power like power brakes. Most hand controls are dual-action devices that permit the simultaneous application of throttle and brake. Dual-action controls are helpful when the car is stopped on a steep hill or when making tight maneuvers on steep grades. The throttle can be applied a little before releasing the brake to prevent the car from coasting backward before moving forward. While most users prefer dual-action, some prefer single-action units because they eliminate the chance of accidentally applying the throttle during braking.

Which is best for you?
The best choice of hand controls for a person depends on a number of factors, such as the car’s layout, expected driving conditions, and the driver’s size, disability, and preference.

Push/twist
Push/twist hand controls are a good choice if either a large driver, a small car, or both, limit space. Economical use of space is achieved because the lever only needs to be moved to apply the brake. Throttle control is achieved by twisting the grip in the same manner as operating a motorcycle.

Push/twist controls provide a precise, sporty feel. By necessity, push/twist hand controls are often power-assisted. Without power-assistance, the twisting motion tends to feel stiff, and the hand tires. With a good quality power-assisted twist control, very little effort is required to maintain a throttle setting; simply resting the hand on the handle should provide enough force. This results in less fatigue on long drives.

Push/twist controls are good in tight turns and on rough roads. Throttle surges, which can be experienced with a push/pull or right angle pull device, as the driver and his or her arm bumps, sways, leans, or lurches going through curves and over bumps tend not to occur with a push/twist. Most push/twist controls are dual-action units.

These controls are not recommended for people with grip problems or those with amputated fingers or hands. Good left-hand dexterity is required for safe driving with push/ twist controls.

Right angle pull
Right angle pull controls are the most widely used form of hand control. They are relatively inexpensive and, usually, easy to install and adjust. Operation is simple and intuitive for these strictly mechanical units.

Space, however, can be a problem. Throttle application requires that the lever be moved down toward the driver’s lap. If the driver is large or the car is small, a push/twist or even a push/pull control may be more suitable. Because the lever is connected to the gas pedal with mechanical linkages, the underside of the dashboard will often require trimming.

For those missing fingers, hands, or with reduced grip strength, various handles, wrist straps, grips, etc., can be adapted for the right angle pull control. Specialized handles can be configured for use with a prosthesis. Right angle pull controls are usually dual-action, but also can be single-action.

Push/pull
Push/pull hand controls are by definition single-action. Since the lever is pulled for gas and pushed for brakes, the gas and brakes can never be operated at the same time.

This is the easiest hand control to learn to use. Senior citizens like the push/pull because there is no confusion when learning, after using the foot pedals all their lives. Power-assisted and non-power-assisted models are available. The driver’s hand can rest directly on the lever without causing the throttle to surge.

As with the right angle pull control, different handles can be adapted to the driver to permit safe and easy operation. Power-assisted push/pull hand controls equipped with handle adaptations are recommended for people with limited arm strength and poor manual dexterity.

Some other factors to consider
When shopping for hand controls, aesthetics is also a factor to consider. Car owners can be surprised to find that a section of the dashboard was cut away during the installation process. Most hand controls are mounted under the dash with a support extending into the driver space under the steering column where the lever is connected. A panel under the dashboard is removed during installation. If the hand control’s design and the dashboard layout permit, the panel can be returned allowing the mounting bracket to be hidden. Sometimes, however, the hand control’s hardware protrudes into the passenger space, and the panel cannot be reinstalled without cutting a window in it. Each installation varies with the model of automobile and the particular hand-control unit. Check with your dealer about what you can expect to see when you get your car back.

Many of us share cars with other family members. It is important that the pedals can still be used with the hand control installed and that there are as few impediments to using them as possible. Most good controls provide room for a pedal-pushing driver. Ask the installer what to expect.

Driving should be fun. Poorly designed hand controls, or a badly performed installation, can cause the driver to be distracted or preoccupied with the control, lead to frustration, and reduce safety. Good hand controls, professionally installed, will allow enjoyable, safe driving.

Installation
No matter what type of hand controls you use, you are making a significant modification to your vehicle. It is, therefore, important to have a trained and qualified person perform the installation.

The installer should cut a minimum amount of the dashboard. The handle should be located in a comfortable position so that the driver can hold on to the hand control and hook a thumb over the steering wheel. This position helps to stabilize the steering wheel and the throttle. The whole assembly should feel solid and sturdy. If the installation is done properly using a high-quality control, driving will be easy and fun.

Everyone is different, and each person is a special case. If you are uncertain about your condition and your abilities, consult a Certified Driving Rehabilitation Specialist (CDRS). A CDRS knows about different disabilities and can advise you about the best solution to your driving needs. Contact a CDRS through your rehabilitation facility or through your local amputee support group.

Whether you are a first-time buyer or already drive with hand controls, it is good to know what is out there and what to look for. High-quality hand controls are available, as are skilled mobility technicians who understand the quality and safety issues involved with their installation.

Spend a few extra dollars to purchase a high-quality product and have it professionally installed. You already have made a significant investment in your vehicle. A quality set of hand controls will surely enhance your driving experience and, above all, your safety.

Semper Fi Fund: Our mission is crucial. Our duty is clear.

About The SEMPER FI FUND (SFF):
The Semper Fi Fund, and its program America’s Fund, provide immediate financial assistance and lifetime support to post 9/11 wounded, critically ill and injured members of all branches of the U.S. Armed Forces, and their families, ensuring that they have the resources they need during their recovery and transition back to their communities. Since establishing the Semper Fi Fund in 2004, they’ve issued more than 86,000 grants, totaling more than $102 million in assistance to over 13,300 of our heroes and their families.

Who Are They?:
The Semper Fi Fund was created by a group of Marine Corps spouses nine years ago, and those same women run the Fund today alongside other spouses from all service branches, retired service members, all of whom intimately know the needs of our military families. They have been by our injured and ill service members’ sides from day one, helping them as they navigate lengthy recoveries and rejoin their communities.

How They Help:
Financial, emotional, and tiered support for our injured/ill service members and their families through the following programs: Family Support, Adaptive Housing, Adaptive Transportation, Specialized Equipment, Education and Career Transitioning, Rehabilitative Sports programs, and more.

Who They Help:
Qualifying post 9/11 Marines, Sailors, Soldiers, Airmen, Coast Guardsmen, and reservists with amputations, spinal cord injuries, Traumatic Brain Injury (TBI), severe Post Traumatic Stress Disorder (PTSD), burns, blindness, other physical injuries, or those suffering from life-threatening illnesses. We also help spouses and children of active duty service members who face a life threatening illness or injury.

How Are They Unique:
The Semper Fi Fund has been awarded the highest ratings from watch dog groups: A+ Top Rated Charity from CharityWatch, and we are one of only three veteran nonprofits to receive this rating in recent years; and 4 Stars from Charity Navigator a rating only given to 4% of all charities. They maintain an extremely low overhead – 6% and provide rapid assistance with no red tape.

How They Raise Funding:
The Semper Fi Fund relies completely on donations from generous individuals, corporations, foundations, and community groups. In an effort to keep their fundraising and administrative costs low, they do not receive government funding or use direct mail campaigns. Their communities across the country host fundraising and awareness events for their mission, both big and small: golf tournaments, motorcycle poker runs, 5/10K races, dinners, and contests – whatever their passion may be! Their are members of the Combined Federal Campaign, through which federal, civilian, postal, and military donors can support us. They encourage all citizens across America to join them in their quest to support our military members who have sacrificed so much in the service to our country.

Their Philosophy:
The basic ideal that drives our efforts is simple: for as much as our heroes have sacrificed, they deserve the best care and support available in their hour of need. They are committed to being there at the time of injury or illness and for a lifetime if needed.

Looking Forward:
The Semper Fi Fund has been successful over the years thanks to their loyal supporters, both individuals and corporations. Yet our challenges continue to intensify due to the level of severity of injury, illness, and post-traumatic stress unique to the length of war on terrorism. These critical injuries are brought home and often call for a lifetime of assistance.

Tax-deductible contributions from people like you make up our lifeblood; whether donations are large or small, a one-time gift or ongoing endowment, every individual or corporation has the power to make a real difference, here and now, no matter where they are in the world.

The Semper Fi Fund is forever grateful to each of their supporters who share in their ongoing mission.

Please help them help those who have given so much in the name of freedom.

Find Financial Resources for Your Mobility Needs

Far too often, you find it hard to afford many of the tools and resources that you need in everyday life. For that reason, there are several alternative ways to get funding that will ensure that you get the assistance you need to live a hassle-free life without worrying about breaking the bank.

Here are a few sources of financial assistance to look into if you are finding it hard to cover all of your mobility expenses.

Medicare:
Usually offered only through private companies, Medicare can be a good option for certain medical devices and equipment and is based on your medical necessity for the goods or services you may need help with.

Medicaid:
While there is no exclusive list in terms of medical equipment covered, cases are approved on a case-by-case basis. Medicaid is a great option to look into if your expenses and needs aren’t covered by Medicare.

The IRS:
Did you know that certain mobility aids such as adaptive driving equipment can be deducted from your federal taxes? Contact your local tax adviser to see what equipment and supplies you use regularly to see if they can be deducted.

State Programs:
Check with your state’s vocational rehabilitation agencies to see if your mobility needs are approved for financial assistance. If any of it helps you get to work or perform your job efficiently, you may be covered here. Aside from that, you may also want to check out your local Center for Independent Living to see if they have any other resources that you can look into for financial assistance.

Vehicle-Related:
If you’ve recently had any adaptive equipment or ramps installed in your vehicle—or, for that matter, if you’ve recently purchased wheelchair van—there are some dealerships that will reimburse you for such things. Check with your local mobility-friendly dealership to learn more.

With these resources at your disposal, you can hopefully stop worrying about money and focus more on living a stress-free life where your mobility needs are easily met.

Putting Amputees Back in the Driver’s Seat

For most of us, an automobile is a necessity rather than a luxury.

Hand Controls putting amputees back in the drivers seat

Hand Controls putting amputees back in the drivers seat

To have a full life in America requires mobility -not just the ability to walk or run, but the ability to travel greater distances with more convenience and flexibility than public transportation provides.

For many lower-limb amputees, however, the lack of feet makes driving impossible in a conventionally equipped vehicle. Hand controls along with left foot gas pedals provide the solution. They make it possible for lower-limb amputees and people with other disabilities to enjoy the prosperity and independence that comes with vehicle ownership and use.

Different types of hand controls

Basic hand controls usually consist of a lever attached to a bracket and mounted under the steering column on cars equipped with automatic transmissions. The lever is moved to operate throttle and brakes. Usually the left hand operates the control, allowing the right hand to steer and operate the vehicle’s accessories. The three most common types of hand controls are push/rock, push/twist, right angle pull, and push/pull.

The push rock and push twist hand control works by twisting the handle to apply the gas and pushing it to apply the brakes. The right angle pull hand control works by moving the lever down towards the driver’s lap for acceleration. To apply the brakes, the driver pushes the handle forward towards the front of the car. The push/pull hand control works by pulling on the handle to apply the gas, and pushing for the brakes. Most hand controls, except for a very few, apply the brakes by pushing.

Most hand controls are hand-powered, using linkages or cables to operate the gas and brakes. Some models are power-assisted to make it easier on the hand and arm. Cars are designed for the driver’s foot to operate the gas and brake, so the force required to operate the hand control can be tiring to the hand during long drives. Power-assist options for hand controls range from very complex devices such as an electric joystick, to relatively simple ones that use vacuum power like power brakes. Most hand controls are dual-action devices that permit the simultaneous application of throttle and brake. Dual-action controls are helpful when the car is stopped on a steep hill or when making tight maneuvers on steep grades. The throttle can be applied a little before releasing the brake to prevent the car from coasting backward before moving forward. While most users prefer dual-action, some prefer single-action units because they eliminate the chance of accidentally applying the throttle during braking.

Which is best for you?

The best choice of hand controls for a person depends on a number of factors, such as the car’s layout, expected driving conditions, and the driver’s size, disability, and preference.

Push/twist

Push/twist hand controls are a good choice if either a large driver, a small car, or both, limit space. Economical use of space is achieved because the lever only needs to be moved to apply the brake. Throttle control is achieved by twisting the grip in the same manner as operating a motorcycle.

Push/twist controls provide a precise, sporty feel. By necessity, push/twist hand controls are often power-assisted. Without power-assistance, the twisting motion tends to feel stiff, and the hand tires. With a good quality power-assisted twist control, very little effort is required to maintain a throttle setting; simply resting the hand on the handle should provide enough force. This results in less fatigue on long drives.

Push/twist controls are good in tight turns and on rough roads. Throttle surges, which can be experienced with a push/pull or right angle pull device, as the driver and his or her arm bumps, sways, leans, or lurches going through curves and over bumps tend not to occur with a push/twist. Most push/twist controls are dual-action units.

These controls are not recommended for people with grip problems or those with amputated fingers or hands. Good left-hand dexterity is required for safe driving with push/ twist controls.

Right angle pull

Right angle pull controls are the most widely used form of hand control. They are relatively inexpensive and, usually, easy to install and adjust. Operation is simple and intuitive for these strictly mechanical units.

Space, however, can be a problem. Throttle application requires that the lever be moved down toward the driver’s lap. If the driver is large or the car is small, a push/twist or even a push/pull control may be more suitable. Because the lever is connected to the gas pedal with mechanical linkages, the underside of the dashboard will often require trimming.

For those missing fingers, hands, or with reduced grip strength, various handles, wrist straps, grips, etc., can be adapted for the right angle pull control. Specialized handles can be configured for use with a prosthesis. Right angle pull controls are usually dual-action, but also can be single-action.

Push/pull

Push/pull hand controls are by definition single-action. Since the lever is pulled for gas and pushed for brakes, the gas and brakes can never be operated at the same time.

This is the easiest hand control to learn to use. Senior citizens like the push/pull because there is no confusion when learning, after using the foot pedals all their lives. Power-assisted and non-power-assisted models are available. The driver’s hand can rest directly on the lever without causing the throttle to surge.

As with the right angle pull control, different handles can be adapted to the driver to permit safe and easy operation. Power-assisted push/pull hand controls equipped with handle adaptations are recommended for people with limited arm strength and poor manual dexterity.

Some other factors to consider

When shopping for hand controls, aesthetics is also a factor to consider. Car owners can be surprised to find that a section of the dashboard was cut away during the installation process. Most hand controls are mounted under the dash with a support extending into the driver space under the steering column where the lever is connected. A panel under the dashboard is removed during installation. If the hand control’s design and the dashboard layout permit, the panel can be returned allowing the mounting bracket to be hidden. Sometimes, however, the hand control’s hardware protrudes into the passenger space, and the panel cannot be reinstalled without cutting a window in it. Each installation varies with the model of automobile and the particular hand-control unit. Check with your dealer about what you can expect to see when you get your car back.

Many of us share cars with other family members. It is important that the pedals can still be used with the hand control installed and that there are as few impediments to using them as possible. Most good controls provide room for a pedal-pushing driver. Ask the installer what to expect.

Driving should be fun. Poorly designed hand controls, or a badly performed installation, can cause the driver to be distracted or preoccupied with the control, lead to frustration, and reduce safety. Good hand controls, professionally installed, will allow enjoyable, safe driving.

Installation

No matter what type of hand controls you use, you are making a significant modification to your vehicle. It is, therefore, important to have a trained and qualified person perform the installation.

The installer should cut a minimum amount of the dashboard. The handle should be located in a comfortable position so that the driver can hold on to the hand control and hook a thumb over the steering wheel. This position helps to stabilize the steering wheel and the throttle. The whole assembly should feel solid and sturdy. If the installation is done properly using a high-quality control, driving will be easy and fun.

Everyone is different, and each person is a special case. If you are uncertain about your condition and your abilities, consult a Certified Driving Rehabilitation Specialist (CDRS). A CDRS knows about different disabilities and can advise you about the best solution to your driving needs. Contact a CDRS through your rehabilitation facility or through your local amputee support group.

Whether you are a first-time buyer or already drive with hand controls, it is good to know what is out there and what to look for. High-quality hand controls are available, as are skilled mobility technicians who understand the quality and safety issues involved with their installation.

Spend a few extra dollars to purchase a high-quality product and have it professionally installed. You already have made a significant investment in your vehicle. A quality set of hand controls will surely enhance your driving experience and, above all, your safety.

Save Big When Purchasing a Dodge Wheelchair Van

2013 Dodge Grand Caravan SXT VMI Northstar DR552571 front right side
You’ve found the ideal Dodge wheelchair van to meet your needs and now it’s time to determine exactly how you’re going to pay for the vehicle. Here are some things you can do to improve the buying experience.

Are You Purchasing from a Dodge mobility dealer?

If you’re buying a new Dodge wheelchair van, you’ll want to consider these pointers before you even think about opening your wallet.

Time is everything.
You can get the best possible prices on a vehicle in the last two weeks of December and between July and October. If you can hold off on a purchase until one of these date ranges, you’ll pay less.

Do your research.
You can pay less for a new vehicle if you do your homework. Know what other dealers are doing and seek out the best possible deals. Knowing what’s happening in the market can give you real negotiating leverage.

Don’t limit your choices.
You don’t need to restrict your choices to the vehicles on the lot. You can have a mobility dealer order the wheelchair van you want and those vehicles that come from the factory shouldn’t cost you a penny more than the ones that are already at the dealership.

Are You Purchasing from an individual?

Paying for a used Caravan, Grand Caravan sold by an disabled individual or caregiver can pose a few unique challenges. Keep the following advice in mind:

Be careful with cash.
Unless you personally know the seller, you should be cautious about showing up anywhere with a large quantity of cash on your person.

Be prepared to pay with a cashier’s check or money order. Many individual sellers will be wary about accepting a personal check from a buyer.

Stay away from wiring money.
Don’t utilize services like Western Union or Moneygram to buy a used wheelchair van. These outlets are often used in fraudulent activity and may not provide you with adequate protection.

Exercise caution.
If you’re considering using an escrow or shipping service when paying for your Dodge wheelchair van. Many people have lost their money due to criminal behavior on the part of those claiming to offer a legitimate service.

Are You Paying for Dodge Wheelchair Van Conversion?

Buying the underlying vehicle may only be part of your plans. If you’ll be paying for modifications, as well, consider the following:

Look for assistance.
Your state’s Department of Vocational Rehabilitation or development services offices may have a program to provide financial assistance for wheelchair van conversions. The Veteran’s Administration may be able to help vets qualify for funding.

Check with your insurance.
Depending upon your personal situation, you health or worker’s compensation insurance may provide benefits that will pay for part, or all, of the necessary modifications. Thoroughly investigate the opportunity.

Talk with your Dodge dealer.
Some dealers can actually wrap the financing of your mobility package up with your vehicle loan. You’ll end up with a single payment and you may save money on the interest rate in the process.

Get a prescription.
If you can get a doctor’s prescription for your planned modifications, you may be able to exempt the expense from sales tax. If you’re not responsible for those taxes, you’ll be spending less money.

Buying a Dodge wheelchair van requires a little bit of planning, thinking and investigation. If you follow these recommendations, paying for a Caravan, Grand Caravan or Sprinter should be more enjoyable and less expensive.